Here we are using the MR355 Pulse Timer to simulate a Light House Beacon.
- In the first wiring diagram the High Bright LED is switched ON & OFF by adjusting the two pre-sets on the timer board. The LED is wired to the Normally Open contact of the relay via a 1K resistor.
- In the second wiring diagram a second dropping resistor is introduced & is connected to the Normally Closed contact of the relay. This gives the effect of the afterglow you often see with lighthouses.
MR357 Light House Beacon Light
Rating is 0.0 out of five stars based on reviews
SKU: MR357
£7.76Price