2.4mm
Highly flexible flame-retardant polyolefin tubing to MIL-1-23053/5 which when heated to 100°C and above, will shrink in a ratio of 2:1.
Flame retardant to UL224-VW1 (except clear). Resistant to acids, alkali, fuel and oil.
Suitable for general insulation, protection and identification; and particularly for industrial cable harness work.
Nominal diameters shown are before shrinking.
Operating temperature range: -55°C to +135°C
Dielectric strength: 25kV/mm min. RoHS compliant.

Supplied in 1.2metre lengths.

Heatshrink sleeving 2:4 - Pre-cut to 1.2m lengths

Name: Heatshrink sleeving 2:4 - Pre-cut to 1.2m lengths
Rating: 0 (0 reviews)

Rating is 0.0 out of five stars based on reviews

From £1.20

Quantity

BRIMAL COMPONENTS

Heatshrink sleeving 2:4 - Pre-cut to 1.2m lengths

Data Sheet

Related Products

CP201 Panel Mtg DC Modulated Speed Controller

Hammond Translucent Box 150 x 89 x 50mm Red , Blue or solid Grey

RB500 Relay Board 5v to 12v Input 2 x Changeover Contacts

LC440 Event Sequencer 10 Outputs from 0.5sec to 4 minutes.

24/0.2 Equipment Wire 10m Roll various colours

16/0.2 Equipment Wire 10m Roll various colours

7/0.2 Equipment Wire 10m Roll various colours

JC252 Table Connection Kit with 2m Cable

BR412 AC, DCC Regulator 12v - 24v Regulated at 12v DC at 1 Amp

BR405 AC, DCC Regulator 5v - 24v Regulated at 5v DC at 1 Amp

AS303 Automatic Shuttle with Timed Stops both ends

MK600 Bicolour 5mm LED Kit (10 Pack)

PC010e Universal Prototype PCB Pack of 5

MR204e Latching Relay for Points and Signal Indications

JC251 Table Connection Kit with 1m Cable

JC100 'D' Sub Male to Female Cable

Leave a Review below for all to see or Contact us here